While I’m in the middle of socializing and gathering more cactus shots for you, I figured I would give you a little light entertainment with this (ridiculously) easy RV Mod. The key to this mod is actually two-fold:
1/ Buy the right cord
2/ Involve a feline friend
Indeed whereas my other RV mods have merely required furry approval, this one is best done with actual kitty involvement. In fact, I might go so far as to say your results will be inadequate without the appropriate paw-of-involvement. But I digress…
The basis for this mod is re-stringing the elastic cord (often called “shock cord” or “bungee cord”) on a recliner chair. We have some very basic no-name recliners that we bought at Camping World over 3 years ago. We love the chairs and apart from some rust they’re actually in pretty good shape. But the shock cord which holds the fabric to the metal frame had deteriorated completely, a pretty normal occurrence for something that sits outdoors in the elements all the time.
Now you can buy “repair kits” for certain types of recliner chairs (e.g. LaFuma chairs have this one), but generally the cord is of mediocre quality and/or the kits are expensive for what you get. The other alternative is to buy bungee or shock cord by the foot. Many stores (such as bungeecords or campmore or REI) offer this, but costs are often ~$0.50-$0.75 per foot depending on thickness. I managed to find an OUTSTANDING deal on Amazon HERE which offered 100 ft of 1/4″ cord for only $27, by far the best I’ve seen anywhere. This was more cord than I needed, but it was solid quality and I figured it would give me enough to re-string both our recliners for the next 5 years. DONE!
Once you have the cord the steps are easy:
- Cut off existing cord, making a note of HOW it is wound onto your chair. The easiest way to do this is actually to tackle one side at a time, using the other side as reference before you cut it off.
- Start stringing the cord through the eyelets. Kitty will keep you alert and ensure you are hitting all the holes. If you lose the end of your cord, kitty will help you retrieve it.
- Once string is completely through, tie one end using a good non-slip knot (I personally like the Figure 8 knot, but you can use any you prefer).
- Progressively tighten the cord along the length of the chair, starting at the knotted end and pulling hard through each eyelet to remove slack until you get to the other end. Work this way along the chair several times to get a good, taut fit. Kitty will observe and approve. Once one side is taught, string the other side and tighten that too before tieing off both sides in a final non-slip knot.
- Finish string ends by burning (to seal fibers) and covering with tape. This will prevent fraying.
- Complete final kitty test (see header shot)